• End Point Linearity

    see Terminal Based Linearity (TBL).

  • End Points

    pressure transducer outputs at specified upper and lower limits of the transducer range.

  • Error

    The algebraic difference between the indicated value and the true value of the input pressure. Usually expressed in percent of full span output, sometimes expressed in percent of the transducer output reading.

  • Error Band

    The band of maximum deviations of the output values from a specified reference line or curve due to those causes attributable to the transducer. Usually expressed as ± percent of span output. The error band should be specified as applicable over at least two calibration cycles so as to include repeatability and verified accordingly.

  • Excitation

    The external electrical voltage and/or current applied to a transducer for its proper operation (often referred to as the supply current or voltage).

Product Selector